Thank you for your inquiry.

In regard to your inquiry about a special hole, could you

let me know what the special hole indicates in a little more detail?

If you would like to create a mounting hole,

you are able to create it by editing a pad.

The procedure for creating it is as follows.

1) Open the [Pad] dialog([Draw] >> [Pad]).

2) Select [Through].

3) Set the [Shape] of the [Electric] as [None] on each layer.

4) Select any shape in the [Shape] of the [Drill Settings].

5) Click [OK].

*Please set the [Shape] of the [Solder] as [Imitation] or [None] on each layer.

■About the placement of a pad

When creating a mounting hole to a footprint, I think it would be easy to

make out the hole if you name its pin name something like "P1" etc.

Regarding the creation of a mounting hole, we have been considering

the function addition in order to create the hole more easily

because there is the demand of the "mounting hole" object

which can be created by only the setting of a hole diameter.

We would appreciate it if you would understand that

we would have some time for the function addition.

If the content above is different from your intention,

I'm sorry but I would appreciate if you would let me know

about the special hole in a little more detail.

Thank you for your continued support!